Introduction of Cement Consumption for Plastering of Internal Brick Wall

Cement consumption for plastering of internal brick wall is one of the major works in construction. The cement mortar is used as a binding material for construction. It is used to coat the surface of the brick wall and to provide a smooth surface for the painting. The cement is mixed with sand and water in the ratio of 1:6. The sand is used as an abrasive material to remove the irregularities from the surface of the wall. The water is used to wet the surface of the wall and to provide a uniform surface for the application of the cement mortar.

Cement Consumption in Plaster 1:4 for 1m2 Area

• The amount of cement required for plastering depends on the area to be covered and the thickness of the plaster
• For an area of 1m2 and a thickness of 1:4, the cement consumption would be approximately 0.25m3.

Cement Consumption in Plaster 1:4 for 1m2 External Brick Wall

• When it comes to plastering an external brick wall, 1:4 cement consumption in plaster is pretty standard
• This means that for every 4 buckets of water, you’ll need 1 bucket of cement
• This mix ratio will produce a strong and durable plaster that will resist cracking and chipping
• So, for a 1m2 wall, you would need 2.5 buckets of water and 1 bucket of cement.

Calculate Cement Consumption for Internal Plastering for 1m2 Area

• Internal plastering is required to finish the internal walls of a building
• The cement consumption for internal plastering 1m2 area is calculated as follows.Volume of Plaster = Plaster Thickness x Area
•  

  For a 12 mm thick plaster and 1m2 area, the volume of plaster required would be

  Volume of plaster = 12 x 1 = 12 cbm

•  

  Assuming a plastering ratio of 15%, the cement consumption for internal plastering 1m2 area would be

•  

  Cement consumption = Volume of plaster x Plastering ratio / Sum of ratios

•  

  For the above volume and plastering ratio, the cement consumption forinternal plastering 1m2 area would be

•  

  Cement consumption = 12 x 15% / (1+15%)

•  

  Cement consumption = 12 x 15% / 1.15

•  

  Cement consumption = 10.43 cbm

Cement Consumption for Plastering of Internal Brick Wall

• As per the thumb rule, 1:6 cement mortar is used for plastering with ratio of cement and sand
• The proportion of cement and sand changes for brickwork as the work progress from foundation to lintel level
• The cement consumption for various plastering work with 1:6 ratio are given in the following table.

Conclusion

As the construction industry continues to grow, so does the demand for cement. Cement is one of the most essential materials in construction, and its use is only expected to increase in the future. Plastering is one of the most common applications for cement, and internal brick walls are one of the most popular surfaces to be plastered. The introduction of cement consumption for plastering of internal brick walls is a welcomed addition to the construction industry. Not only will it make the process of plastering internal brick walls easier and more efficient, but it will also help to reduce the amount of waste generated from construction projects.

Frequently Asked Questions

How much cement is typically used for plastering an internal brick wall?

The typical amount of cement used for plastering an internal brick wall is 10.43 cbm.

How much cement is required for plastering an internal brick wall?

The cement consumption for plastering an internal brick wall is approximately 10.43 cbm.

What is the standard cement consumption for plastering an external brick wall?

The standard cement consumption for plastering an external brick wall is 1:4. This means that for every 4 buckets of water, you’ll need 1 bucket of cement.