Storm Windows | Storm Window Installation | Internal Vs External Storm Windows

Introduction of Storm Windows

Today we will discuss the window that protects against storms. This window is named after his work. Yes, I am talking about storm windows here.

Storm windows exist in North America but are uncommon in continental Europe. Double, triple, or quadruple glazing windows are prevalent in continental Europe. Storm windows are usually made of glass, rigid plastic panels, or flexible plastic sheets.

This window can be permanent or temporary. The storm window acts like insulated glazing. In the U.S. this older style of window is often referred to as a “storm sash”.

What Is Storm Window?

“Storm Windows” means a window installed outside the primary windows already installed. Their job is to provide extra wind protection and weather insulation. Storm windows are installed at the top of the existing window to normalize the temperature in the home.

Custom-order can also be made to fit the Storm window current window, plus available in different colors. It is usually installed as a shield on the outer part of the existing windows. This window can also be selected as an interior storm window. They are also available with options such as two-tracks or triple-tracks.

Storm windows are also called hurricane windows.

also read: Skylight Windows | Types of Skylight Windows | Installing a Skylight Window

Storm Window Glass / Hurricane Window Glass

In modern homes, they are used to improve their thermal insulation and soundproofing. Aside from insulation, storm windows provide strong protection against damage to expensive glass panes during inclement weather such as hail.

The cost of replacing a single-pane window with a double-pane window containing high-performance glass can be higher. Apart from this option, there is also the option of installing low-emissivity (Low-E) storm windows. Installing interior or exterior energy-efficient storm windows has the same benefit. Storm windows help reduce air movement in and out of existing windows, improve comfort, and reduce heating and cooling costs.

Low-E Storm Windows

Older storm windows are usually found only in clear glass, and newer models are available with a low-E coating that is capable of reducing heat transmission. Low-E Storm windows offer the advantage of more insulation. Such windows are useful in reflecting the winter heat and also help keep the house cool during summer to make the house more comfortable.

Modern storm windows are not like old storm windows. It does not need to be cleaned or removed to enter or exit. The new Low-E Storm is purpose-designed to blend in with the existing architecture and is permanently fixed. These windows are available as fixed or operable units.

Internal Storm Windows Vs. External Storm Windows

The interior and external storm windows have similarities in their energy saving. External models provide the benefit of actual storm protection for the window. They are useful for surviving and protecting external factors such as wind, rain, and snow.

The interior window is easier to install, remove, and clean and provides better seals for more energy efficiency.

The exterior storm window is permanent, so it does not go away, while the “permanent” interior storm window is also easy. The inside storm window becomes a cost-effective and versatile option.

also read: Comparison Between Bay Windows and Bow Windows

Storm Window Installation

The process of Installing Storm / Hurricane Windows is shown below.

The window and the nearest surface should be checked. Before installation, it is necessary to see problems such as glass, rotten wood, broken parts, and water leaks.

Order the custom storm window of the new storm window measurement.

Measure the width between the inside edges of the window casing.

1. At the bottom, above
2. In the middle of the window
3. Measure the height from the top of the window casing to its highest point.

If horizontal sizes differ, order a new custom storm window when ordering the smallest size window.

A list of items requiring items is shown below.

1. Storm window
2. Measure tape
3. Screwdriver
4. Putty knife
5. Caulk
6. Caulking gun

After collecting all the materials, installing the window can be processed by following the steps.

Procedure

Step 1. Make sure the storm window is appropriate for the opening. The top of the storm window should be determined by checking the direction of the movable panels. Keeping the storm window in the opening and checking if all the screw holes land on the wood is necessary.

Step 2. If there is an old window, remove it.

Step 3. The top and sides of the existing window opening should be coke. Considering that the bottom is not to close.

Holding the Caulking gun at an angle of 45-degree on the edge of the storm window, using a “pulling” motion, holding the gun at a constant angle. The caulk is to slide the tube nozzle with the joint while pressing the trigger of the gun.

Step 4. Start the process of changing the Storm window to the opening.

Ensure the opening is pushed tightly to the top of the storm window.

Step 5. Now, the storm window has to be secured in a window frame.

Using a screwdriver and screw, the upper corners of the window are temporarily secured and not fairly tight.

Step 6. The expansion should be adjusted below the storm window.

A typical Storm Window comes with a window sill expander. It helps to allow the bottom (approximately ½ inch) of the storm to meet the angular seal of the window opening. Tightly lower the adjustable expand against the windowsill with a putty knife. See that the expansion also contacts around the bottom.

Step 7. Install the rest of the installation screw after squaring the window unit.

Be careful whether the distance between the window and the frame is the same. (The ideal gap should be 1/16 inches on each side of the window).

Storm Window Replacement

Many factors should be considered before changing a window.

Generally, if you want to upgrade any kind of home, this is an important question regarding how much the budget is. If there is no money problem, windows other than the Storm window can be selected. If the money is tight, the Storm window becomes a good option.

The replacement storm window is usually installed outside the house on the standard single pen window. This window does not open or close. By creating a solid seal, they help improve insulation in the home and provide protection against outside elements.

The single pen window allows cool air and hot air to go out, which is why many prefer to change these windows.

If the existing window is 30 years or older and does not have to be removed for architectural purposes, the storm window should be installed in the outer part. Doing so will increase the life expectancy of the inside window.

It is advisable to seek the help of a professional experienced if the Storm Window is selected as a replacement option.

Storm Window Replacement Cost

The average cost of changing the Storm window of a home can be approximately $ 120 to $ 200 per window. This is the cost by adding both the material and the labor. This window can help to better insulate and protect the home at a lower cost.

also read: Jalousie Window | What Is Jalousie Window? | Types of Jalousie Windows

Advantages of Storm Windows

Here are the Storm Windows’ Pros as follows.

1. Reduce Energy Bills

If this window is made from good quality material, there is a good benefit. Low-E Storm window reduces utility costs by 30 percent.

2. Protection of the Existing Window

This window protects the original window that is already existing as well as increases the architectural appearance.

3. Price Less Than New Window

The storm window cost is approximately 25 to 50 percent less than the replacement window. Thus, these windows are cheaper than other windows.

4. Protection Against External Weather Elements

The window protects the home against external factors such as stormy winds, rain, thunderstorms, and snow.

5. Reduces the Sound

Storm window helps reduce the noise of traffic, barking dogs, and leaf blooms. They can reduce the transmission of noise by up to 95 percent.

6. Long to last

Double or triple-track windows allow to open and close in hurricanes, so it does not need to be removed when the weather is heated.

Disadvantages of Storm Windows

Here are the Storm Windows’ Cons as follows.

1. Alter of Facade

Some external storm windows’ profile is less than those of other windows.

2. Impractical for DIY

Installing a storm window is usually a complex task, and if the house is higher than one floor, it requires an extension ladder to install.

3. Maintenance Requirement

Especially to maintain the integrity of Wood Storm frames, they need to be re-colored periodically. Windowsill has to keep the holes on the aluminum window clean to prevent water damage.

---

Like this post? Share it with your friends!

Suggested Read –

• Pivoted Window
• Window Sealant for Winter
• What Size Ladder for 2 Story House?
• Labor Cost to Install Glass Block Windows
• How Many Bag Mix Is a 3000 PSI Concrete?
• Sliding Windows | Types of Sliding Windows | Sliding Window Replacement
• Dormer Windows | Types of Dormer Windows | Dormer Window Installation
• Lantern Windows | Lantern Glass And Lantern Material | Types of Lantern Windows

---